EASA Part 145 Checklist
Annex II (Part-145) Checklist
145.A.10 Scope
- Line Maintenance (LM) and Base Maintenance(BM) Descriptions
- LM task definitions (defect rectification, T/S, etc..)
- BM task definitions
- Temporary or occasional cases (ADs, SBs)
- How to perform ADs,SBs task which are deemed base maintenance tasks in LM
- Scheduled Maintenances
- How to assess progressive tasks being performed in LM
- Facility Locations such as inside and outside the Member State, satellite facilities, sub-contractors, line stations
- Identify such facility and procedures to control such facility.
- Guidance on the smallest organisations acceptance to satisfy Part 145 Regulations
145.A.15 Approval
- How to apply for issue or change of an approval. Application should be made on EASA Form 2 format. see EASA web site for Form2 format.
145.A.20 Terms of approval
- Organisation should specify the scope of work in its MOE. Scope of works are detailed on the Appendix IV — referred to in Annex I (Part-M) Subpart F and Annex II (Part-145)
- A class rating table (Ax,Bx,Cx,D) is required for each locations
145.A.25 Facility requirements
145.A.25 (a) Facility
- Large enough to place aircraft (access platforms and docking) and components.(Segragation of specialised workshops, hangar bays)
- Hangar Layout (max. aircraft accomodation at the same time, biggest aircraft ,etc..) as applicable to scope of work
- Protection from the weather elements, dust, airborne particules
- Sealing Hangar and workshop floors to generate dust
145.A.25 (b) Office accommodation
- planning, technical records, Quality, technical reference area, Storage, etc
145.A.25 (c) Working environment Qualifications
- smoke, paint preventation, heating/air condition, lighting,noise protection, safety system (limited access,fire,security)
145.A.25 (d) Storage Facilities Qualifications
- Segregation of serviceable and unserviceable aircraft component, materials, equipment, tools.
- Clean, well ventilated, constant dry temperature.Manufacturer's storage condition should be followed.
- Enough Large and strong storage rack to place.
- Security
145.A.30 Personnel requirements
145.A.30 (a) Accountable Manager Qualifications and Responsibilities
145.A.30 (b) Nominated Personnel Qualifications
145.A.35 Certifying staff and support staff
145.A.35 (g) Issuance of Certifying Staff Authorisation Certificate
145.A.35 (h) Certification authorisation style
145.A.35 (i) Responsibility of issuance authorisation certificate
145.A.35 (j) Records of Certifying Staff
145.A.35 (k) Providing authorisation certificate to the personnel
145.A.35 (l) Presenting authorisation certificate
145.A.35 (m) Age limitation
145.A.35 (n) A Category Authorisation
- Record all details concerning the airworthiness review staff
145.A.40 Equipment and tools
145.A.40 (a) Availability and use of equipment
145.A.40 (b) Tools and equipment control and calibration
145.A.42 Components
145.A.42 (a) Component classification
145.A.45 Maintenance data
145.A.45 (a) Availability of current and applicable data
145.A.45 (b) Content of the applicable data
145.A.45 (c) inaccurate, incomplete or ambiguous maintenance data
145.A.45 (d) Modifiying Maintenance Data
145.A.45 (e) Maintenance work card system
145.A.45 (f) Access to the maintenance data
145.A.45 (g) Keeping up-to-date of maintenance data
145.A.47 Production planning
145.A.47 (a) Production planning system
145.A.47 (B) Planning of maintenance tasks and shifts
145.A.47 (C) Maintenance tasks handover
145.A.48 Performance of maintenance
145.A.50 Certification of Maintenance
145.A.50 (a) Issuance of CRS Form 1 referred to in Appendix II of Annex I (Part-M)
145.A.50 (b) CRS issuance time
145.A.50 (c) Reporting of incomplete maintenance to the operator
145.A.50 (d) Certificate of Release of Component Maintenance (refer to Appendix II of Annex I (Part M) for Form 1 )
145.A.50 (e) Deffered Maintenance
145.A.55 Maintenance and airworthiness review records
145.A.55 (a) Retaining Records
145.A.55 (b) Repair and modification Records
145.A.55 (c) Terms and interval of retaining Records
145.A.60 Occurrence reporting
145.A.65 Safety and quality policy, maintenance procedures and quality system
145.A.70 Maintenance organisation exposition
- Preparing Moe . (Refer to foreign Part 145 UG.CAO.00024-008 document to comprise MOE )
145.A.75 Privileges of the organisation
145.A.80 Limitations on the organisation
145.A.85 Changes to the organisation
145.A.90 Continued validity
Comments
Post a Comment